TrainingCourse ArtCAM Insignia ENG.pdf

(6176 KB) Pobierz
ArtCAM Insignia 2010
Training Course
Delcam plc,
Talbot Way, Small Heath Business Park, Birmingham, B10 0HJ.
www.delcam.com
Important Notice
This document is supplied as part of a Delcam Training Course. It is not intended to be
distance-learning material: rather as an aid for Tutors when presenting material to course
delegates and as a subsequent aid memoir to those delegates.
Delcam does not accept responsibility for any personal belongings / valuables whilst on the
premises. Delegates are advised to keep their belongings on their person at all times.
Delcam plc. has no control over the use of the software described in this document and
cannot accept any responsibility for any loss or damage howsoever caused as a result of using
the software. Users are advised that all results from the software are checked by a competent
person in accordance with good quality control procedures.
The software described in this document is furnished under a license agreement and may be
used only in accordance with the terms of such license.
Copyright
2010 – Delcam plc. All rights reserved
UK Training Centre
Tel: 0121 683 1050
Fax 0121 7665511
UK Customer Support
Tel: 0121 683 1010
Fax: 0121 7665542
ArtCAM
Contents
ArtCAM Insignia 2010 Contents
Chapters
1. Introduction
2. Generating Vectors
3. Vector Editing and Layers
4. Bitmaps
5. Toolpath Options
6. 2D Vector Machining
7. 3D machining
8. Post Processing Toolpaths
9. Engraving
10. Drilling
11. Toolpath Templates
12. Machining Inlays
13. Nesting Vectors
14. Multiple Plates
Page Number
1.1 – 1.16
2.1 – 2.18
3.1 – 3.20
4.1 – 4.6
5.1 – 5.2
6.1 – 6.16
7.1 – 7.16
8.1 – 8.8
9.1 – 9.6
10.1 – 10.4
11.1 – 11.4
12.1 – 12.4
13.1 – 13.4
14.1 – 14.6
Issue ArtCAM Insignia 2010
1
Contents
ArtCAM
2
Issue ArtCAM Insignia 2010
ArtCAM
1. Introduction
1. Introduction
Introduction
ArtCAM Insignia
allows complex
2D and 3D products
to be machined quickly and easily
from
2D vectors
(ArtCAM
Wireframe)
or
bitmaps
(Image
files).
These
vectors
and
bitmaps
can be generated within
ArtCAM
or imported from other systems.
ArtCAM
can
also import
3D Surface
data, which is translated on entry or after as a
Relief (3D)
model.
ArtCAM Insignia
contains tools for creating and editing vectors from which toolpaths can be
generated. Multiple toolpaths are easily generated for roughing, finishing and engraving. The
toolpaths can then be simulated to allow complete visualisation of the product before actual
machining.
Starting ArtCAM Insignia
•
Double click the
ArtCAM
icon
mouse button.
on the desktop screen with the
left
The
ArtCAM
start up screen appears as shown above. To start working in
ArtCAM
the user
must create a
New Model.
Issue ArtCAM Insignia 2010
1.1

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin