Op3_e.pdf

(587 KB) Pobierz
Preface, Contents
1
Part I
Introduction
SIMATIC HMI
OP3
Operator Panel
Equipment Manual
Part III
Installation and
Commissioning
Part II
Functions of the OP3
2
3
12
13
14
15
16
A
Part V
Appendices
Part IV
Device Description,
Test and
Monitoring Functions
E
Glossary, Index
6AV3591–1AD00–1AB0
Release 11/99
Safety Guidelines
This manual contains notices which you should observe to ensure your own personal safety, as
well as to protect the product and connected equipment. These notices are highlighted in the
manual by a warning triangle and are marked as follows according to the level of danger:
!
Warning
indicates that death, severe personal injury or substantial property damage
can
result if proper
precautions are not taken.
!
Caution
indicates that minor personal injury or property damage can result if proper precautions are not
taken.
Note
draws your attention to particularly important information on the product, handling the product,
or to a particular part of the documentation.
Qualified Personnel
Equipment may be commissioned and operated only by
qualified personnel.
Qualified person-
nel within the meaning of the safety notices in this manual are persons who are authorized to
commission, ground and identify equipment, systems and circuits in accordance with safety
engineering standards.
Note the following:
Correct Usage
!
Warning
The equipment may be used only for the applications stipulated in the catalog and in the tech-
nical description and only in conjunction with other equipment and components recommended
or approved by Siemens.
Startup must not take place until it is established that the machine, which is to accommodate
this component, is in conformity with the guideline 89/392/EEC.
Faultless and safe operation of the product presupposes proper transportation, proper storage,
erection and installation as well as careful operation and maintenance.
Approvals
Trademarks
The approvals that apply to the device are detailed in the Chapter
Technical Data.
The registered trademarks of Siemens AG are listed in the Preface. Some of the other
designations used in these documents are also registered trademarks; the owner’s rights may be
violated if they are used be third parties for their own purposes.
Editor and Publisher: A&D PT1
Disclaimer of Liability
We have checked the contents of this manual for agreement with
the hardware and software described. Since deviations cannot be
precluded entirely, we cannot guarantee full agreement. However,
the data in this manual are reviewed regularly and any necessary
corrections included in subsequent editions. Suggestions for im-
provement are welcomed.
Technical data subject to change.
©Siemens
AG 1999
Order No. 6AV3591–1AD00–1AB0
Impressum
Copyright
©
Siemens AG 1999 All rights reserved
The reproduction, transmission or use of this document or its
contents is not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility model or design,
are reserved.
Siemens AG,
Automation & Drives
SIMATIC Human Machine Interface
A&D PT1 D1
Postfach 4848, D-90327 Nuernberg
Siemens Aktiengesellschaft
Preface
Purpose
This equipment manual provides operators, fitters, configurers and system
support engineers with information about the functionality and technical
design of the OP3.
Organization of
the manual
The equipment manual
Operator Panel OP3
is organized into five parts:
Part
I
II
Chapters
1-2
3-4
5 - 11
12
III
IV
V
13 - 14
15 - 16
Contents
Overview of the Operator Panel and range of
functions in tabular form.
How to operate the OP3.
Step-by-step instructions on how to operate the
Operator Panel using the standard screens.
Information on how to connect the OP3 to the
SIMATIC S7.
– Mechanical and electrical installation,
– Commissioning
– Dimensions and connection elements,
– Test and monitoring functions
Brief descriptions of standard screens,
System messages,
Technical data,
ESD guidelines,
SIMATIC HMI documentation,
Glossary of technical terms.
Appendix
Operator Panel OP3
Edition 11/99
i
Preface
Conventions
The following conventions are used in this manual:
Motor off
Variable
Text on the display of the OP3 is shown in ”type-
writer” style.
Symbolic names representing variable values on the
display of the OP3 are shown in italic ”typewriter”
style.
Functions which you can choose are shown in nor-
mal italics.
Steps that are performed in succession are linked by
an arrow.
The names of keys are shown in a different type.
System
System
Mode
ESC
History
The various releases of the equipment manual correspond to the following
firmware and ProTool versions:
Release
07/95
08/96
11/99
Remarks
First release of the OP3 equipment
manual
Technical content of the equipment ma-
nual reviewed
Technical content of the equipment
manual reviewed
ProTool version
V 2.0 and later
V 3.0 and later
V 5.1 and later
Trademarks
The following names are registered trademarks of the Siemens AG:
SIMATIC®
SIMATIC HMI®
HMI®
ProTool®
ProTool/Lite®
ProTool/Pro®
SIMATIC Multi Panel®
SIMATIC Multifunctional Platform®
MP 270®
ProAgent®
ii
Operator Panel OP3
Edition 11/99
Preface
Other support
In the case of technical queries, please contact your local Siemens in the sub-
sidiaries and branches responsible for your area.
SIMATIC Customer
Support Hotline
Available worldwide, at all times:
Nuernberg
Johnson City
Singapur
Simatic Basic Hotline
Nuernberg
SIMATIC BASIC Hotline
Local time: Mo - Fr 7:00 to 17:00
Telephone: +49 (911) 895-7000
Fax:
E-Mail:
+49 (911) 895-7002
simatic.support@
nbgm.siemens.de
Johnson City
SIMATIC BASIC Hotline
Local time: Mo - Fr 8:00 to 19:00
Telephone: +1 423 461-2522
Fax:
E-Mail:
+1 423 461-2231
simatic.hotline@
sea.siemens.com
Singapur
SIMATIC BASIC Hotline
Local time: Mo - Fr 8:30 to 17:30
Telephone: +65 740-7000
Fax:
E-Mail:
+65 740-7001
simatic.hotline@
sae.siemens.com.
SIMATIC Premium Hotline
(charged, only with SIMATIC Card)
Time:
Fax:
Mo - Fr 0:00 to 24:00
+49 (911) 895-7001
Telephone: +49 (911) 895-7777
Operator Panel OP3
Edition 11/99
iii
Zgłoś jeśli naruszono regulamin