Software Upgrade Guide.pdf

(423 KB) Pobierz
<<< Advanced Software Upgrade Guide >>>
Applicable Models: LCD TV and PDP TV are released on 2008, 2009 years
-
LCD TV:
**LH****, **LU****, **SL****,**LF****, **LG60**, **LG70** Series
-
PDP TV:
**PS70**, **PS80**, **PG40**, **PG60**, **PG70** Series
Searching the latest software.
Search the latest software from the website
(http://www.lge.com)
- Our counselor of Call center inform you more detail method.
Connect to www.lge.com
Select your country
Move to the Support
Click the Manual & Drivers
⑤
Fill in the your Model name
⑥
Click the” Drivers & software”
Downloading the Software file to the USB Memory device.
Save the latest software from website to the USB Memory device.
!
Caution!! Your PC don’t have any security Program
①
Connect the USB Memory device to the USB port of your PC.
②
Make a folder in USB Memory device ( Folder name must be “LG_DTV” )
③
Click the “ Download this file” on the website to save it to the USB Memory device
y
“Click”
④
S
Save software fil to “LG_DTV” folder of USB M
ft
file t “LG
DTV”
f ld
f
Memory d i
device
Connecting the USB device to USB IN Jack on the TV
Connect the USB device to USB IN (or USB IN SERVICE ONLY) Jack on the TV
※
Position of USB In Jack : Side or Rear (differ depending on your TV Model)
OR
Running the software upgrade
If TV recognize the latest software for customer’s TV model from connected USB device,
g
,
it will appear below message.
Please select
“start”
to execute the upgrade automatically
※
If there are the same or lower software version in the USB device than Software version in your TV,
doesn’t appear below message.
※
A few USB devices may not be compatible with the TV, in that case you use another USB device.
!
Warning!!
Please don’t disconnect the power or remove the USB device while running the upgrade.
Pl
d ’t di
t th
th
d i
hil
i
th
d
Step1. Please select “Start” to execute the upgrade automatically.
- Press Arrow key to move to the “Start”
Step2. Copying software file from the USB device to the TV
※Don
t
※Don’t
remove the USB device while this message is displayed
displayed.
Step3. Running the software upgrade
※
Don’t turn off the power while this message is displayed.
※
If some problems happen during upgrade,
the TV will display the error message and
restart to return to the previous version.
Step4. Complete the software upgrade
- If the upgrade is completed, this message is displayed.
- The TV will turn off and on automatically after the upgrade completed.
!
Note
You can check the upgraded software version on the “Diagnostics menu”
( OSD Menu: Setup -> Diagnostics)
It might be initialized previous menu setting (Channel tuning, Picture, Audio,,,)
If you have still problem after upgrade, please contact with us again.

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin