2181351ENEN Electric pivot-mounted trailer tow hitch retrofit befor 07-2013 F10.PDF

(870 KB) Pobierz
Original BMW Accessories.
Installation Instructions.
Electric pivot-mounted trailer tow hitch retrofit
BMW 5 Series Saloon (F 10) built before 07/2013
Retrofit kit number
71 60 6 865 772
71 60 6 874 904
71 60 2 296 612
71 60 2 296 613
Electric pivot-mounted trailer tow hitch
Electric pivot-mounted trailer tow hitch
Electrical components retrofit kit without PA 337 or SA 715
Electrical components retrofit kit with PA 337 or SA 715
Installation time
The installation time is
approx. 4.5 hours.
If the fan needs to be replaced, the installation time increases by
approx.0.75 hours.
On cars with the N52, N53 and N55 engine (apart from 535i xDrive), the installation
time increases by
around 1.5 hours
for the exchange of the right-hand engine mounting block. This may vary
depending on the condition of the vehicle and the equipment in it.
The installation time shown does not include any time spent on programming / coding.
The calculation of the total costs for the programming time must be factored into the calculation of retrofitting costs
(no invoicing via warranty).
Important information
These installation instructions are primarily designed for use within the BMW dealership organisation and by
authorised BMW service companies.
These installation instructions are intended for use by qualified specialist staff trained on BMW vehicles with the
relevant expert knowledge.
All work must be completed using the latest BMW repair manuals, wiring diagrams, servicing manuals and work
instructions, in a rational order, using the prescribed tools (special tools) and observing current health and safety
regulations.
If you experience installation or function problems, restrict troubleshooting to approx. 0.5 hours for
mechanical work and 1.0 hour for electrical work.
To avoid unnecessary extra work and/or costs, send an inquiry straight away to the technical parts support team via
the Aftersales Assistance Portal (ASAP).
Quote the following information:
- Chassis number,
- Retrofit kit part number,
- A detailed description of the problem,
- And any work already carried out.
Do not archive the hard copy of these installation instructions since daily updates are provided via ASAP!
© BMW AG, Munich
01 29 2 181 351
08/2015
(Z/Z)
1
Pictograms
Denotes instructions that draw your attention to dangers.
!
Denotes instructions that draw your attention to special features.
Denotes the end of the instruction or other text.
Installation information
The electric fan must be exchanged in various cars (see EPC for part numbers and further details).
!
If the fan is not replaced, the towing load reduces and can cause the engine to stall.
On cars with the N52, N53 and N55 engine (apart from 535i xDrive), the engine mounting bracket on the right must
also be replaced (see ordering instructions).
Ensure that the cables and/or lines are not kinked or damaged as you install them in the car. Costs arising from this
will not be reimbursed by BMW AG.
Additional cables/lines that you install must be secured with cable ties.
If the specified PIN chambers are occupied, bridges, double crimps or twin-lead terminals
must be used.
All pictures show LHD cars; proceed accordingly on RHD cars.
Program/encode the retrofit with ISSS (Integrated Software Service Station) via the –
Conversions
– path
Ordering instructions
The fan is not included in the retrofit kit and must be ordered separately (see EPC for part number and further
details).
The engine mounting bracket
R
and the aluminium screw engine mount kit
S
are not included in the retrofit kit and
must be ordered separately for cars with the N52, N53 and N55 engine (apart from 535i xDrive) (for part numbers
and instructions, see EPC).
Legal requirements
There is a type approval for the trailer towing hitch pursuant to
ECE-R55
with approval reference
E13 00*3096*00
or
E13*55R-01 3833.
These installation instructions also serve as installation confirmation. They must be printed and attached to
the vehicle documents and kept in the car at all times until the trailer tow hitch has been entered in the vehicle
documents.
Special tools required
00 9 317 Trim wedges
© BMW AG, Munich
01 29 2 181 351
08/2015
(Z/Z)
2
Table of contents
Section
1.
2.
3.
4.
5.
6.
7.
8.
9.
Page
Towing hitch parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Preparatory work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Towing hitch connection diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Towing hitch installation and cabling diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installing the towing hitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing and connecting the retrofit cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Concluding work and coding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Towing hitch wiring diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Space for the coupling ball and installation height for the towing coupling ball . . . . . . . . . . . . . . . . . . . . . . . 15
© BMW AG, Munich
01 29 2 181 351
08/2015
(Z/Z)
3
1.
Towing hitch parts list
A
B
C
I
D
E
F
G
H
J
K
L
M
N
T
O
Legend
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
Retrofit cable
Trailer tow hitch
Trailer module
Trailer tow hitch control unit
Cable tie 3.0 mm x 200 mm (30 x)
Button
Button holder
Button trim
Fillister head screw (2 x)
Speed nut (2 x)
Fuse 20 A Mini (2 x)
Fuse 20 A (2 x)
Miniature connector (4 x)
Plastic nuts (2 x)
Hexagon nut M12 (4 x)
Guide
Equipment holder
Engine mounting bracket (cars with N52, N53 and N55 engines only (except 535i xDrive), not supplied in the
retrofit kit)
Aluminium screw engine support kit (cars with N52, N53 and N55 engines only (except 535i xDrive), not sup-
plied in the retrofit kit)
Fan (not supplied with the retrofit kit)
P
Q
R
S
010 0039 Z
© BMW AG, Munich
01 29 2 181 351
08/2015
(Z/Z)
4
2.
Preparatory work
ISTA No.
Conduct a brief test
Disconnect the negative pole of the battery
The following components must be removed first of all
Rear bumper trim
Support for rear bumper trim
Luggage compartment floor trim
Luggage compartment wheel arch trim, right
Loosen the rear right power distribution box
Trim for tail panel
Bottom right A-pillar trim
Glove compartment
Bottom right dashboard trim
Front door sill strip (interior) on both sides
Rear door sill strip (interior) on both sides
Bottom right B-pillar trim
Loosen the right-hand front power distribution box
Bottom left A-pillar trim
Pedal trim
Rear seat
Rear seat backrest
Also on cars with N52, N53 and N55 engine (except 535i xDrive)
Replace the engine mounting bracket on the right
Also on cars with fan replacement
Replace the fan
---
12 00 ...
51 12 156
---
51 47 101
51 47 161
---
51 46 050
51 43 075
51 16 366
51 45 181
51 47 000
51 47 030
51 43 150
---
51 43 070
51 45 185
52 24 005
52 24 010
22 11 110
17 11 035
© BMW AG, Munich
01 29 2 181 351
08/2015
(Z/Z)
5

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin