MSA5T0725A162392 airbag connector.pdf

(68 KB) Pobierz
Airbag Connector
AIRBAG SYSTEM
2. Airbag Connector
A: PROCEDURE
1. POWER SUPPLY
1) How to disconnect:
(1) With the lock arm (A) pushed in, move the
connector in the direction of arrow.
2. DRIVER’S AIRBAG (BETWEEN AIRBAG
HARNESS AND ROLL CONNECTOR) AND
SIDE AIRBAG
1) How to disconnect:
(1) Push the lock arm (A).
(2) With the lock arm (A) pushed in, move the
slide lock (B) in the direction of arrow.
(B)
(A)
(A)
AB-01518
AB-00017
CAUTION:
When pulling the slide lock or disconnecting
connector, be sure to hold the connector, not
the harness.
2) How to connect:
Holding the connector (A), and push it in carefully
until a clicking sound is heard.
(A)
(3) With the slide lock pulled, release the lock
arm (return to original position) and disconnect
the connector.
CAUTION:
When pulling the slide lock or disconnecting
connector, be sure to hold the connector, not
the harness.
AB-01519
AB-00018
CAUTION:
Be sure to insert the connector in until it is
locked. Then pull it gently to make sure that it is
locked.
2) How to connect:
Holding the connector, push it in securely until a
clicking sound is heard.
CAUTION:
Be sure to insert the connector in until it is
locked. Then pull it gently to make sure that it is
locked.
AB-00019
AB-8
Airbag Connector
AIRBAG SYSTEM
3. DRIVER’S AIRBAG MODULE AND PRE-
TENSIONER
1) How to disconnect:
(1) Using a flat tip screwdriver, pull the push
lock upward to unlock.
4. FRONT SUB-SENSOR AND SIDE AIR-
BAG SENSOR
1) How to disconnect:
Holding outer part (A), pull it in the direction of ar-
row.
CAUTION:
When pulling the slide lock or disconnecting
connector, be sure to hold the connector, not
the harness.
AB-00478
(2) Pull the connector to disconnect from driv-
er’s airbag module assembly or retractor as-
sembly.
AB-00024
2) How to connect:
Holding the connector, push it in securely until a
clicking sound is heard.
NOTE:
You cannot connect the connector when the push
lock is in the lock position. Move the push lock to
the release position to connect the connector.
AB-00479
2) How to connect:
Connect the connector in the reverse order of dis-
connecting. At this time, be sure to insert the push
lock until a clicking sound is heard.
CAUTION:
• Be sure to insert the connector in until it is
locked. Then pull it gently to make sure that it is
locked.
• Be sure to push the push lock in securely.
CAUTION:
• Do not touch the outer section since outer
side (A) will move back.
• Be sure to insert the connector in until it is
locked. Then pull it gently to make sure that it is
locked.
AB-00025
AB-00480
AB-9
Airbag Connector
AIRBAG SYSTEM
5. PASSENGER’S AIRBAG
1) How to disconnect:
(1) Move the slide lock (A) in the direction of ar-
row.
( A)
AB-00021
(2) With the slide lock pushed, pull it in the di-
rection of arrow and disconnect the connector.
AB-00022
CAUTION:
When pulling the slide lock or disconnecting
connector, be sure to hold the connector, not
the harness.
2) How to connect:
Holding the connector, push it in securely until a
clicking sound is heard.
CAUTION:
Be sure to insert the connector in until it is
locked. Then pull it gently to make sure that it is
locked.
AB-00023
AB-10

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin