MSA5T0721A161792 general.pdf
(
24 KB
)
Pobierz
General Description
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
1. General Description
A: CAUTION
• Wear appropriate work clothing, including a cap,
protective goggles and protective shoes when per-
forming any work.
• Remove contamination including dirt and corro-
sion before removal, installation or disassembly.
• Keep the disassembled parts in order and pro-
tect them from dust and dirt.
• Before removal, installation or disassembly, be
sure to clarify the failure. Avoid unnecessary re-
moval, installation, disassembly and replacement.
• Vehicle components are extremely hot after driv-
ing. Be wary of receiving burns from heated parts.
• Be sure to tighten fasteners including bolts and
nuts to the specified torque.
• Place shop jacks or rigid racks at the specified
points.
• Before disconnecting connectors of sensors or
units, be sure to disconnect the ground cable from
the battery.
B: PREPARATION TOOL
1. SPECIAL TOOL
ILLUSTRATION
TOOL NUMBER
18353AA000
DESCRIPTION
CLAMP PLIERS
REMARKS
• Used for removing and installing the PCV
hose.
• This is a general tool made by the French
company CAILLAU. (code) 54.0.000.205
To make this easier to obtain in the same way as
genuine Subaru parts, it has been provided with
a tool number as an ST.
ST18353AA000
EC(H4SO)-2
Plik z chomika:
maxsiorwrc
Inne pliki z tego folderu:
Subaru_Forester_2007_Service_Manual.pdf
(46388 KB)
MSA5T0725A162391 general.pdf
(695 KB)
MSA5T0725A162393 inspec locations after collision.pdf
(57 KB)
MSA5T0725A162392 airbag connector.pdf
(68 KB)
MSA5T0725A162394 drivers airbag module.pdf
(49 KB)
Inne foldery tego chomika:
MY 01
MY_03
MY_05
MY_11
MY_14
Zgłoś jeśli
naruszono regulamin