iRig Acoustic Stage User Manual Instrukcja.pdf

(1895 KB) Pobierz
The Advanced Digital Microphone System
for Acoustic Guitar
USER MANUAL
Contents
Table of Contents
Contents
English
iRig Acoustic Stage
Register your iRig Acoustic Stage
Installation and setup
Cancel feedback button
Tone button
Instrument calibration
Calibration process
Phase switch
AUX IN
Low battery indications
Specifications
Warranty
Support and more info
Regulatory
2
3
3
3
4
10
11
12
12
14
15
15
16
16
16
17
2
English
iRig Acoustic Stage
Thank you for purchasing iRig Acoustic Stage.
Your package contains:
•
•
•
•
•
•
•
iRig Acoustic Stage
2xAA batteries
iRig Acoustic microphone
Belt clip
Pouch
Quick Start Guide
Registration Card
iRig Acoustic Stage is a revolutionary digital microphone system for Acoustic Guitar, both with steel and nylon
strings.
We all know that the best possible sound when recording an acoustic guitar is the one you get with a classic
studio microphone in a well sounding studio, with a great preamp and proper positioning, and we all know how
compromised the sound of a typical stock or after-market piezo pickup system is.
The typical under-saddle piezo pickup system takes all the air and acoustic qualities from the instrument out of
the picture. All the subtle nuances and harmonics of a great acoustic instrument are normally lost with bridge-
mounted pickup systems.
The main functionality of iRig Acoustic Stage is to make your guitar sound exactly as if it was captured with
a classic recording studio setup with a very simple clip-on microphone that can be applied in seconds to any
instrument.
The synergy between the microphone, the preamp and DSP unit creates an incredible natural-sounding tone
for any acoustic instrument. It features 3 tone presets — natural, warm and bright — for both steel string
and nylon string instruments. And while, when compared to piezo pickups, iRig Acoustic Stage makes any
instrument sound dramatically better right out of the box, you can also calibrate the system to precisely fit the
sonic signature of your instrument and playing style allowing it to draw out the full acoustic potential of your
instrument.
Register your iRig Acoustic Stage
By registering, you can access technical support, activate your warranty and receive free JamPoints™ which will
be added to your account. JamPoints™ allow you to obtain discounts on future IK purchases! Registering also
keeps you informed of all the latest software updates and IK products.
Register at:
www.ikmultimedia.com/registration
3
English
Installation and setup
1. Insert the provided batteries in the battery compartment. You can use both Alkaline or Ni-MH rechargeable
batteries. High energy Ni-MH will last at least 18 hours. Tip: If you play frequently, a good suggestion is to
have 2 sets of rechargeable AAs, one in use and the other on charge and swap them every 2-3 gigs.
2. Connect the iRig Acoustic microphone.
3. Fix the microphone to your instrument. If the soundboard of your instrument is very thin the iRig Acoustic
microphone may not stay perfectly steady during use. To solve this you can add one or more layers of
adhesive tape inside the iRig Acoustic microphone slot to make it a perfect fit for your instrument.
4
English
4. Connect the iRig Acoustic Stage output to the PA mixer or to an acoustic guitar amplifier, as you would do
with a normal acoustic-electric guitar.
5. Turn ON the unit. Tip: Always turn down the channel volume on the mixer or the volume of the amp before
turning ON or OFF iRig Acoustic Stage!
5

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin