perluts.pdf

(23 KB) Pobierz
Perl version 5.10.0 documentation - perluts
NAME
perluts - Perl under UTS
SYNOPSIS
This document can be read
as is:
as
README.uts,
or you can read it after you build your package
using "man perluts".
The purpose is to help you build Perl for UTS, which, if you follow these instructions, should be easy,
and result in a solidly working installation.
DESCRIPTION
Perl 5.7.2 (Developmental) or Perl 5.8.x (forthcoming) for UTS
BUILDING PERL ON UTS
NOTE: Some sites have redefined the way uname works, and if yours does this, special steps must
be taken so that Configure can recognize your system as a UTS system. To see if you are in this
category, issue the command "uname -a". It should look something like:
uts juno 4 4.4 9672 370
At any rate, the first field should be "uts". If this is not the case; supposing it is, say telcoUTS, create a
script, uts/uname (i.e. uname, in the subdirectory "uts" of the main Perl source dir): # uname
/usr/bin/uname "$@" | sed -e 's/^telcoUTS/uts/'
and when you execute Configure, do it as below, except for adding PATH=uts:$PATH as a prefix. I.e.
do:
PATH=uts:$PATH ./Configure ...
There is no need to do an interactive configure, just type
./Configure -de [-Dusedevel] [-Doptimize=-g ] 2>&1 | tee Conf.out
"-Dusedevel" may be required to configure Perl 5.7.2 non-interactively. Use -Doptimize=-g if you want
to run Perl under sdb or gdb, OR if you want to be able to use the -D command line flags to perl,
which are occasionally useful in debugging perl scripts.
In this and the following steps, the "2>&1 | tee XXX.out" records all output from the process, which will
be useful if anything unexpected goes wrong.
Then do the compilation with
make 2>&1 | tee make.out
Finally, test using
make test 2>&1 | tee make-test.out
In the output, the only failures you should see should look like:
lib/Math/BigInt/t/bigfltpm.........Use of uninitialized value ...
FAILED at test 57
lib/Math/BigInt/t/bigintc..........ok
lib/Math/BigInt/t/bigintpm.........FAILED at test 204
lib/Math/BigInt/t/mbimbf...........Use of uninitialized value ...
Illegal division by zero at ../lib/Math/BigInt/Calc.pm line 314.
FAILED at test 71
http://perldoc.perl.org
Page 1
Perl version 5.10.0 documentation - perluts
lib/Math/Complex...................exp: OVERFLOW
FAILED at test 250
lib/Math/Trig......................exp: OVERFLOW
ok
lib/Memoize/t/array................ok
...
lib/Net/protoent...................ok
lib/Net/servent....................FAILED at test 0
This means that everything passes except for some problems in the packages "Math::BigInt",
"Math::Complex", and "Math::Trig". The lib/Net/servent failure seems to be a bug in the test program.
To confirm this, from the main Perl source dir, do:
LD_LIBRARY_PATH=`pwd` ./perl -Ilib lib/Net/servent.t
and it should output
1..3
ok 1
ok 2
ok 3
Installing the built perl on UTS
Run the command "make install"
AUTHOR
Hal Morris
UTS Global LLC
email: hom00@utsglobal.com
http://perldoc.perl.org
Page 2

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin