wk_overhead_consol_removal.pdf

(96 KB) Pobierz

REMOVAL

1. Disconnect and isolate the battery negative cable.

2. Pull downward on the sides of the overhead

console housing firmly and evenly to disengage the

snap clips from the overhead console bracket.

3. Lower the overhead console from the headliner far

enough to access the wire harness connectors (2).

4. Disconnect the roof wire harness connectors (2)

from the overhead console wire harness connector.

5. Remove the overhead console from the headliner.

INSTALLATION - WK overhead console

1. Position the overhead console near the mounting

location on the headliner.

2. Reconnect the roof wire harness connectors (2) to

the overhead console.

3. Align the snap clips on the overhead console

housing with their receptacles (1) in the overhead

console bracket.

4. Push upward firmly and evenly on the sides of the

overhead console housing over the snap clip

locations until the snap clip is fully engaged with its

receptacle in the overhead console bracket.

5. Reconnect the battery negative cable.