1_00021-1_FEA209544_102UEN_A.PDF

(84 KB) Pobierz
Installation Instruction, Mechanical
Installation Instruction, Mechanical
Applicable for K510
Contents
1
2
General ............................................................................................................... 2
Hardware ............................................................................................................ 2
2.1
Test Setup ............................................................................................. 2
2.2
Computer............................................................................................... 3
2.3
Service Card Reader/Service Card ....................................................... 3
2.4
DCU-60 / USB Cable............................................................................. 3
2.5
Infrared Device ...................................................................................... 3
2.6
Bluetooth Device ................................................................................... 3
2.7
Label Printer (optional) .......................................................................... 3
Software ............................................................................................................. 4
3.1
EMMA III................................................................................................ 4
3.2
Labelmake II software (optional) ........................................................... 4
Revision History ................................................................................................ 5
3
4
1/000 21-1/FEA 209 544/102 A
Company Internal
©
Sony Ericsson Mobile Communications AB
Approved according to 1/109 41-4/FCP 101 3650/2
Installation Instruction, Mechanical
1 General
This document describes the installation procedure for the Mechanical repair
package.
The Mechanical repair package consists of a Computer and Interface Cables. A
service card is required for security reasons. A label printer can be installed to be
able to print new labels (optional).
2 Hardware
All hardware must be approved by Sony Ericsson and is documented in the
Equipment List.
2.1
Test Setup
1/000 21-1/FEA 209 544/102 A
Company Internal
©
Sony Ericsson Mobile Communications AB
2(5)
Installation Instruction, Mechanical
2.2
Computer
IBM compatible computer is required. The computer should include at least two USB-
ports. Refer to Equipment List for minimum requirements.
2.3
Service Card Reader/Service Card
The Service Card Reader is delivered with the necessary software and instructions
for installation. The Service Card Reader should be connected to an USB-port on the
computer.
2.4
DCU-60 / USB Cable
The cable is the interface between Computer and the phone. The DCU-60 cable
should be connected to an USB-port on the computer.
2.5
Infrared Device
An RS 232 or USB type infrared adapter or another phone may be used.
Install according to the manufacture’s instructions.
2.6
Bluetooth Device
Any Bluetooth device as headset, other Bluetooth phone or other Bluetooth device
can be used to verify the Bluetooth function in the phone. Set up the connection
according to the chosen equipments manufacture.
2.7
Label Printer (optional)
A Zebra printer model 90xi, 90xiII or 4000 deluxe shall be used. Connect the printer
with a standard RS 232 serial printer cable [refer to the Zebra printer manual] to the
serial port on the computer. Read the Zebra installation manual for more information
about the installation.
1/000 21-1/FEA 209 544/102 A
Company Internal
©
Sony Ericsson Mobile Communications AB
3(5)
Installation Instruction, Mechanical
3
Software
3.1
EMMA III
EMMA III contains software upgrades and tools requiring for servicing this phone.
Emma III is accessible through the CSPN. Installation and user manuals are
available in the EMMA III start page.
http://ma3.extranet.sonyericsson.com/ma3/
3.2
Labelmake II software (optional)
Download the Labelmake software from
CSPN.
Unzip the file and run the setup.exe
and follow the instructions. Read the file README.txt under C:\Program
Files\Ericsson\Labelmake and follow the instructions. Start the program by selecting
Labelmake II in your Windows START-menu.
1/000 21-1/FEA 209 544/102 A
Company Internal
©
Sony Ericsson Mobile Communications AB
4(5)
Installation Instruction, Mechanical
4 Revision History
Rev.
A
Date
2006-05-05
Changes / Comments
First release
1/000 21-1/FEA 209 544/102 A
Company Internal
©
Sony Ericsson Mobile Communications AB
5(5)

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin