Sony Ericsson W300 instrukcja rozbiórki.pdf

(1449 KB) Pobierz
Working Instruction, Mechanical
Working Instruction, Mechanical
Applicable for Z530i, Z530c, W300i, and W300c
Contents
1
General........................................................................................................... 3
1.1 Phone Portions – Upper and Lower........................................................... 3
1.2 Using Hand and ESD Protection ............................................................... 3
1.3 Protection of LCDs, Lenses, and Windows............................................... 3
1.4 Acceptable Pry Tools ................................................................................ 3
1.5 When an “ * ” appears beside a Tool in “Tools Needed:” ........................ 3
Lower Portion ............................................................................................... 4
2.1 Lower Portion Disassembly ...................................................................... 4
2.1.1
Battery Cover Removal................................................ 4
2.1.2
Battery Removal .......................................................... 4
2.1.3
Rear Speaker Cover Removal ...................................... 4
2.1.4
Outer Lower Cover Removal ....................................... 4
2.1.5
Circuit Board Removal ................................................ 4
2.2 Lower Portion Reassembly........................................................................ 4
2.2.1
Circuit Board Installation............................................. 4
2.2.2
Outer Lower Cover Installation ................................... 4
2.2.3
Rear Speaker Cover Installation................................... 4
2.2.4
Battery Installation ....................................................... 4
2.2.5
Battery Cover Installation ............................................ 4
Upper Portion................................................................................................ 4
3.1 Upper Portion Disassembly....................................................................... 4
3.1.1
Perform Lower Portion Disassembly ........................... 4
3.1.2
Lower Inner Cover Removal........................................ 4
3.1.3
Style-Up Cover Removal ............................................. 4
3.1.4
Upper Inner Cover Removal ........................................ 4
3.1.5
Upper Outer Cover Removal ....................................... 4
3.1.6
LCD Removal .............................................................. 4
3.2 Upper Portion Reassembly ........................................................................ 4
3.2.1
LCD Installation........................................................... 4
3.2.2
Upper Outer Cover Installation.................................... 4
3.2.3
Upper Inner Cover Installation..................................... 4
3.2.4
Lower Inner Cover Installation .................................... 4
3.2.5
Style-Up Cover Installation.......................................... 4
3.2.6
Perform Lower Portion Reassembly ............................ 4
Part Replacement.......................................................................................... 4
4.1 Battery Cover ............................................................................................ 4
4.2 Battery ....................................................................................................... 4
4.3 Rear Speaker Cover................................................................................... 4
4.4 Label 4
2
3
4
3/00021-1/FEA 209 544/600 D
©
Sony Ericsson Mobile Communications AB
Working Instruction, Mechanical
4.4.1
Label Removal ............................................................. 4
4.4.2
Label Installation.......................................................... 4
4.5 Lower Outer Cover.................................................................................... 4
4.6 Antenna Assembly .................................................................................... 4
4.7 Speaker Box .............................................................................................. 4
4.8 Rear Speaker Cloth.................................................................................... 4
4.9 Vibrator ..................................................................................................... 4
4.10
Bluetooth Antenna........................................................................... 4
4.11
Dome Array ..................................................................................... 4
4.11.1
Dome Array Removal .................................................. 4
4.11.2
Dome Array Installation............................................... 4
4.12
System Connector............................................................................ 4
4.12.1
System Connector Removal......................................... 4
4.12.2
System Connector Installation ..................................... 4
4.13
Lower Inner Cover .......................................................................... 4
4.14
IR Window ...................................................................................... 4
4.15
Volume Key .................................................................................... 4
4.16
Keypad............................................................................................. 4
4.17
Bumper Strip and Microphone Mesh .............................................. 4
4.18
Upper Outer Cover .......................................................................... 4
4.19
Rubber Plugs that hold the Style-Up Cover .................................... 4
4.20
Magnet............................................................................................. 4
4.20.1
Magnet Removal .......................................................... 4
4.20.2
Magnet Installation ...................................................... 4
4.21
LCD Assembly ................................................................................ 4
4.22
Receiver........................................................................................... 4
4.23
Hinge ............................................................................................... 4
4.24
Main Flex Film ................................................................................ 4
4.25
Camera Module ............................................................................... 4
4.26
Upper Inner Cover........................................................................... 4
4.27
Outer Co-Brand Label ..................................................................... 4
4.27.1
Outer Co-Brand Label Removal .................................. 4
4.27.2
Outer Co-Brand Label Installation............................... 4
4.28
Inner Co-Brand Label...................................................................... 4
4.28.1
Inner Co-Brand Label Removal ................................... 4
4.28.2
Inner Co-Brand Label Installation ............................... 4
4.29
Style-Up Cover................................................................................ 4
4.30
LCD Sub-frame ............................................................................... 4
5
Revision History ............................................................................................ 4
3/00021-1/FEA 209 544/600 D
©
Sony Ericsson Mobile Communications AB
2(86)
Working Instruction, Mechanical
1 General
1.1
Phone Portions – Upper and Lower
This document uses the hinge of the phone to divide the phone into two identifiable portions. The
portion of the phone that contains the keypad will be referred to as the lower portion of the phone.
The portion of the phone that contains the displays will be referred to as the upper portion of the
phone. The basic disassembly and reassembly procedures will be structured based on these two
distinct portions.
1.2
Using Hand and ESD Protection
When handling this product, keep all surfaces clean of dirt, dust, debris, and hand oil. Use
appropriate ESD precautions when working on this product. The use of finger cots or gloves, an
ESD mat, and an ESD wrist strap are required at minimum.
1.3
Protection of LCDs, Lenses, and Windows
Any time the screen portion of a display assembly, the windows of a display cover, or a camera
lens is unprotected and will be exposed for an extended period of time, add a protective film over
the exposed part to reduce the amount of dust, finger prints, debris, and/or damage that the part
may obtain.
1.4
Acceptable Pry Tools
Whenever the phrase “pry tool” is used, a nylon pointer, an orangewood stick, or a front opening
tool may be used, depending on the user’s preference.
1.5
When an “ * ” appears beside a Tool in “Tools Needed:”
A “ * ” beside a tool in a procedure’s list of tools indicates that the tool is not specifically called
out in those instructions, but an operator may find it helpful to use that tool when performing some
steps of that procedure.
3/00021-1/FEA 209 544/600 D
©
Sony Ericsson Mobile Communications AB
3(86)
Working Instruction, Mechanical
2 Lower Portion
2.1
Lower Portion Disassembly
The following subsections make up the “Lower Portion Disassembly” procedure. These
subsections are arranged in the order that they must be performed to properly disassemble the
lower portion of this product. Before starting disassembly, check whether there is a protective film
over the two display windows. If one or both of the windows lack a protective film, clean the
unprotected window(s) and add a protective film.
2.1.1
Battery Cover Removal
Tools needed to perform the following steps:
•
None
Step-by-Step Instructions
1. Close the phone and orient it so that the battery door
is towards you.
2. Slide the battery cover towards the end of the phone
that contains the system connector. The battery
cover will slide 9 to 10 MM (~3/8 of an inch) in the
specified direction and will not slide any further.
3. Lift the battery cover off of the phone.
3/00021-1/FEA 209 544/600 D
©
Sony Ericsson Mobile Communications AB
4(86)
Working Instruction, Mechanical
2.1.2
Battery Removal
All of the sections of the lower portion disassembly preceding this section must be performed in
sequential order before the steps listed below can be performed.
Tools needed to perform the following steps:
•
None
Step-by-Step Instructions
NOTE!
Do not tap the phone against a hard surface
in an attempt to get the battery out. Damage
to the phone may result!
1. At the end of the battery closest to the system
connector, catch the accessible portion of the battery
and lift it away from the phone.
2. Once the end of the battery that is being lifted is free
from the battery cavity, slide the remainder of the
battery out of the battery cavity.
3/00021-1/FEA 209 544/600 D
©
Sony Ericsson Mobile Communications AB
5(86)

Plik z chomika:

Inne pliki z tego folderu:

Inne foldery tego chomika:

Zgłoś jeśli naruszono regulamin